iteco IT 10122 - Battery Recharge

OPERATING AND MAINTENANCE HANDBOOK
Baery recharge
Baeries are the energy source of the machine. In order to use their
capacities in the best way without the risk of a premature decay, al-
ways carry out the recharge aer every use, independently of what
the charge indicator signals.
If the recharge is not carried out immediately, a permanent damage
might occurr to the baeries.
Leaving even only one night the baeries not charged may result in
a permanent damage.
Features
•Baery charger: 24V - 30A
•Voltage: 24V
•Charge time: about 12 hours
•Operating temperature: from -20°C to +50°C
•Protection against output short circuit
•Protection against polarity reversal (fuse)
•Weight: 1.5 Kg
•Connection to the net: standard 3 poles 230V outlet
1
IT10122 - IT12122
The baeries have to be charged with the special baery charger (1)
placed in the middle of the truck.
•Power supply: 220V single-phase - 50Hz