iteco IT 10122 - Battery Disposal; Lifting and Transportation; Storage

OPERATING AND MAINTENANCE HANDBOOK
Baery disposal
Run-down lead baeries can not be dumped with ordinary solid waste;
being composed of noxious materials, they must be collected, disposed
of and/or recycled under the legislation prevailing in each state.
Liing and transportation
Make sure that:
•The scissor is completely close.
•Τhe machine is o.
•The platform is not extended.
•The means utilized for liing can support the machine mass equal
to:
Liing
Liing may be carried out with a fork truck or a crane. The loading
areas are indicated through special adhesive labels.
Use a liing beam for liing with a crane. The four coupling points on
the machine are indicated through special adhesive labels.
Transportation
During its transport, fasten the machine to the vehicle platform by
means of bands passing through the points of aachment indicated
for the liing.
It is forbidden to operate the machine in transportation conditions
(placed on the vehicle platform).
Storage
In case of long storage periods, shelter the machine in a dry and venti-
lated seing, with completely loaded baeries. Reload baeries every
2 months regularly
Before using the machine aer a storage period exceeding 30 days,
carry out the inspections described in the Maintenance summary
table, item “Aer long periods of inactivity ”.
IT10122 - IT12122
2815 kg for IT10122 - 3315 kg for IT12122.