OPERATING AND MAINTENANCE HANDBOOK
Replacing hydraulic oil
Hydraulic oil is a polluting product.
Avoid uid leakages by using collection tanks and take precautions
against accidental leakages by resorting to oil-absorbing products.
Exhausted oil must be collected and not disposed of into normal
discharge lines; specialized rms aend to dispose of or possibly
recycle industrial oils, under the laws prevailing in each individual
state.
A cap is located under the tank for total oil discharge.
•Discharge all oil from tank.
•Close discharge cap.
•Fill in new oil through lling cap.
Checking performance
Use a chronometer for executing the following controls.
All tests must be executed with the machine at.
Safety speed
•Select safety speed on platform control panel.
•Push joystick to max forward position.
IT10122 - IT12122
•Check that machine covers 10 m in a time greater than 60 sec.
To Next Page
Loading...