OPERATING AND MAINTENANCE HANDBOOK
Engine brushes check
Check brush wear of traction electric motors and electrical pump mo-
tor; replace if necessary.
Check of brakes on ramp
Parking brakes must be capable to stop the machine on max. slope
indicated in the “Technical data” table.
Check that brakes stops on a slope indicated in the above mentioned
table.
Braking spaces
All tests must be executed with the machine at.
FAST SPEED
•Select fast speed on platform control panel.
•Push joystick to max forward position.
•Release joystick and check that the braking space is lower than 60
cm.
IT10122 - IT12122
To Next Page
Loading...