iteco IT 10122 - Platform Lifting;Lowering; Starting and Enabling Platform Controls

OPERATING AND MAINTENANCE HANDBOOK
Platform liing/lowering
• Turn le the key in selector 1 by maintaining the position and move
selector 5 upwards in order to li platform or downwards to lower
platform.
Before liing or lowering platform make sure that no obstacles are
present on or under it.
Starting and enabling platform controls
• Insert key in selector 1 and turn right, in order to put platform con-
trols into operation ; the pilot light 6 goes on. The key remains in
xed position and it is possible to extract it.
5
1
1
6
IT10122 - IT12122