iteco IT 10122 - 110 V Line; Battery Charger Kit 110 V; Additional Battery Kit

OPERATING AND MAINTENANCE HANDBOOK
Optional
110V Line
To supply current in platform it is necessary to connect a mains cable
to the right back plug.
A socket foreseen in the platform supplies current to electric instru-
ments.
Baery charger kit 110V
This kit includes all elements to recharge the baeries at 110 V.
Features
•Baery charger: 24V - 30A
•Power supply: Dual Input (220V - 115V)
•Voltage: 24V
•Charge time: about 12 hours
•Operating temperature: from -20°C to +50°C
•Protection against output short circuit
•Protection against polarity reversal (fuse)
•Weight: 1.5 Kg
•Connection to the net: standard 3 poles 115V outlet
IT10122 - IT12122
A cut-out box switch (pos. 1) and a magnetothermic switch (pos. 2)
have also been provided in the truck centre.
Additional baery kit
Kit consisting of 4 additional baeries placed in the rear box. The bat-
tery charger will have inevitably dierent characteristics:
•Baery charger: 24V - 60A
•Power supply: 220V single-phase - 50÷60 Hz
•Voltage: 24V
•Charge time: about 9 hours
•Operating temperature: from -20°C to +50°C
•Protection against output short circuit
•Protection against polarity reversal (fuse)
•Weight: 5.5 Kg
•Connection to the net: standard 3 poles 220V outlet