iteco IT 10122 - To Minimize Hazards

OPERATING AND MAINTENANCE HANDBOOK
To minimize hazards
Follow the here below instructions:
Precautions for the travelling with the lied platform
• Check the ground is rm and even.
• Do not use the machine on slippery, icy, muddy ground and with
holes, which has a slope higher than the allowed limit.
•Check that the ground where the machine has to operate is free from
holes, bumps, drops, uneven level, obstructions, debris and cover-
ings which could hide possible potholes or others dangers.
• Comply with the maximum load and the allowable number of per-
sons.
• Distribute the loads and place them if possible in the middle of the
platform.
• Make sure the ground resists to the force and load of tyres.
• Avoid the machine knocks against xed or mobile obstacles.
• Do not use the machine with materials suspended to the handrails
or to the scissors li.
• Give the best aention during movements with mobile travelling
platform.
• During movements, liing and lowering of the platform, check that
there are not obstructions around, over and under the machine.
• Carry out the movements only if the working area visibility is com-
plete.
IT10122 - IT12122