iteco IT 10122 - Safety Check; Red Emergency Stop Push Button

OPERATING AND MAINTENANCE HANDBOOK
Safety check
The following test enables to check that all safety devices of the ma-
chine work properly.
The safety systems applied to the machine are inevitably subject to wear
and to go out of tune. Therefore, they must be controlled and kept in
perfect eciency; also, it is not advisable to evaluate their operational
and safety conditions only on the basis of their functioning.
The presence of safety systems does not relieve the operator of the re-
sponsibility of using the machine in an adequate and conscious way.
Red emergency stop push buon
•Press emergency stop push buon on ground control panel and check
that no operation is possible, either from ground or on platform. Put
push-buon to ON again.
• Press emergency stop push buon on platform control panel and
check that no operation is possible, either from ground or on platform.
Put push-buon to ON again.
IT10122 - IT12122