iteco IT 10122 - SQ3 Microswitch; SQ6 A - SQ6 B Microswitches

OPERATING AND MAINTENANCE HANDBOOK
SQ3 Microswitch
The SQ3 microswitch (pos. 1) placed in the right rear part of the truck,
is enabled by the platform liing.
• It stops the liing movement to the maximum height before the
cylinder mechanical limit switch.
SQ6A - SQ6B Microswitches
The microswitches SQ6A - SQ6B (pos.1,2), being located in the inside
part of the back connection of the truck, stop the traction and steering
movements, when the platform has lied above the operating height
of SQ5, if the protections against overturning are not fully lowered.
1
2
1
IT10122 - IT12122