OPERATING AND MAINTENANCE HANDBOOK
Electric hazards
• To assure the earth-leakage of the electrostatic charges, the front
partition of the machine, beyond the driving wheels, is equipped
with a conductive strip.
Always check the wear of this braid and its contact with the
earth.
• As the machine is not electrically insulated, the operator has to pay
a particular aention to avoid any contact with probably energized
parts.
• As already mentioned in the section “Not allowable operations”, do
not carry out works near high-voltage transmission lines at a distance
lower than 5 meters
.
Explosion or burn hazards
• Do not use the machine near open ames or heat sources.
• Charge baeries in ventilated environment, far from heat sources
or explosive uids.
• Do not use the machine in case of oil leakage.
IT10122 - IT12122
To Next Page
Loading...
