DAILY 4x4 ‒ GUIDELINES FOR BODYBUILDERS
GENERAL INFORMATION
1.1 SCOPE OF THE GUIDELINES
5
– Printed 692.68.999 – 3 Ed. - Base 08-2020
GENERAL INFORMATION
1.1 SCOPE OF THE GUIDELINES
The scope of this publication is to provide information, features and instructions for fitting and transformation of the original
IVECO vehicle in order to ensure its functionality, safety and reliability.
These Guidelines also aim to indicate to bodybuilders:
● the quality level to be obtained;
● obligations regarding the safety of operations;
● obligations regarding the objective responsibility of the product.
It should be noted that the collaboration with IVECO is based on the assumption that the bodybuilder uses the maximum of their
technical and organisational skills and that operations are technically and perfectly complete.
As outlined below, the topic is extensive and we can only provide the rules and minimum precautions that can
allow development of the technical initiative.
Faults or defects caused by total or partial failure to comply with these Guidelines are not covered by the guarantee on the chassis
or relative mechanical units.
1.2 TECHNICAL DOCUMENTATION AVAILABLE ELECTRONICALLY
The following technical documentation is available from http://ibb.iveco.com/en/SitePages/Home.aspx:
● Directives for transformation and fitting of vehicles;
● technical specifications;
● truck diagrams;
● tractor diagrams;
● chassis diagrams;
●
other range-specific data.
1.3 AUTHORISATION
Modifications or versions indicated in these Guidelines and carried out in full compliance of the instructions provided, do not re-
quire any specific authorisation.
If this is not the case, IVECO authorisation is required to carry out:
● particular changes to the wheelbase;
● work on the braking system;
● Modifications to the steering system, as a mechanical element and as power steering (also electric):
● modifications to the stabilizer bars and suspensions;
● modifications to the cab, cab mounts, locking and tilting devices;
● replacing the engine or the "driveline" with electric motor or hybrid systems;
● modifications to intake, engine exhaust and SCR components;
● power take-off applications;
● tyre size variations;
● modifications to the coupling parts (hooks, articulations);
● any modification not included in these Guidelines.
To Next Page
Loading...
Need help?
General
