Gb Fr
324501D revision07 - 69 -
De
Verify regularly the following points:
- Wiring of receiver to electrical unit on machine.
- Control relay contacts.
- Condition of cover seal and its correct position,
- tightening of screws and cable glands (ORRS and ORRA) and tightness of
antenna.
- If accessory OWR01 (external BNC antenna connector for ORRA and ORRS
receiver) is used, check the antenna connection and check that it is clean and
free of any oxidation.
- Clean the receiver by eliminating any foreign matter.
Only use non aggressive cleaning product on base of soapy solution.
Servicing the ORR receiver :
To Next Page
