GbFr
- 68 - 324501D revision07
De
- Housing of the UCE transmitter must not be opened. Except to modify the
identity code or to change batteries, in that case, open the transmitter housing
in a clean place, dry and exempt from dust.
- f one of the function buttons or the seal of the transmitter is damaged
(or in an incorrect position), the transmitter must not be any more used
until replacement of these tightness spare parts.
In opposite case, any liquid, any dust or any foreign body can damage the
transmitter.
- The attention of the user is attracted to the risks of the use of the remote
control in an environment containing solvents of polymers or glues which can
degrade the good functioning of transmitter mechanical parts.
- Verify regularly the good state of the transmitter, paying a special attention on
the function button, batteries / accumulators, the tightening of housing screws
the seal (multifunction transmitter OREL).
- Clean the transmitter by eliminating any foreign matter.
Only use non aggressive cleaning product on base of soapy solution.
5- Servicing
BEFORE STARTING ANY SERVICING OPERATION, SWITCH OFF THE
MAIN POWER SUPPLY FOR THE SYSTEM CONTROLLED.
Servicing the ORE transmitter :
To Next Page
Loading...
