Section E - Hydraulics
Drive Motors
Wheel Drive Motors
E-110 E-110
9803-9340-8
865900B
Fig 27.
Note: Note that the sealed joint remains fragile for six
hours after assembly. Avoid any shock to the joint and do
not test the motor or brake during this time.
10 Install the torque reduction shims (115).
11 Coat the brake discs with hydraulic fluid.
12 Install one external disc (103) then one internal disc
(104), then alternately. The last disc must be an
external disc (103).
865910-1
Fig 28.
Key
K Fig 28. ( T E-110)
101 Brake Housing
102 Mounting Screw
103 External Brake Disc
104 Internal Brake Disc
105 Shims
106 Brake Piston ‘O’ Ring
107 Brake Piston
108 Spring Washer
109 Snap Ring
111 Seal
115 Torque Reduction Shim
141 Brake Cover
142 Plug
143 ‘O’ Ring
ïðî
ïðì
ïðí
ïïë
ïðí ïðì
ïðì
ïðí
ïðë
ïïð
ïïïòï
ïïïòî
ïïïòí
ðõðòï
ïðï
ïðê
ïðç
ïðè
ïðé
ïìî
È
ïðî
ïìï
ïìí
ïïï
To Next Page
Loading...
