jcb Mini CX - Page 289

Section E - Hydraulics
Drive Motors
Wheel Drive Motors
E-119 E-119
9803-9340-8
866010B
Fig 66.
2 Install the bearing outer race (074) in the bearing
support housing up to the stop. Check that it is in its
proper position
K Fig 67. ( T E-119).
866010C
Fig 67.
3 Turn over the bearing support and install the bearing
outer race (073) up to its stop. Check that it is in its
proper position. Do not forget to replace the seal
spring
K Fig 68. ( T E-119).
866020A
Fig 68.
4 Coat the bearing outer race (073) with grease
K Fig 69. ( T E-119).
866020B
Fig 69.
5 Coat the lips of the seal (072) with grease
K Fig 70. ( T E-119).
866020C
Fig 70.
6 Coat the bearing (073) with grease
K Fig 71. ( T E-119).
866020D
Fig 71.
ïðç
ðéí
ðéî
ðéí