Jonker Sailplanes JS3 RES User Manual

JS-MD 3 RES Maintenance Manual
Supplement
MD11-AMM-00-002
Issue: 00
Rev. 00
Rev. Date: 23-May-22
Page 12-1
12 SPECIAL TOOL LIST
Some special tools required to maintain the RES system, are listed below:
Bleeding reservoir
The bleeding reservoir (T 234 32 101 00) is used to assist in the bleeding of RES system
with the water cooled controller option (4.11.2).
The tool is consists of the following parts:
• Reservoir
• Connecting tubes
• 12V battery
• Pump connector
• Stand (any suitable stand to position reservoir above the controller)
Any suitable stand is required to hold the reservoir in place, ensure the reservoir is above
the liquid cooling system. The connecting tubes are used to connect the bleeding reservoir
to the liquid cooling system, as described in 4.11.2.4. It should be noted that the lower
connecting point on the reservoir should be connected to the suction side of the liquid
cooling system (connect to the no-spill fitting).

Jonker Sailplanes JS3 RES Specifications

General

Brand	Jonker Sailplanes
Model	JS3 RES
Category	Aircrafts
Language	English