Chapter 2 OPERATIONS
2.7 SOFT KEY OPERATION
2-34
Displaying the other AIS data
Reference:
AIS retrieved vessel can be set by specifying MMSI number.
For details of settings, see "2.13.8 SETTING AIS RETRIEVED VESSEL".
AIS destination ship can be set by specifying MMSI number.
For details of settings, see "2.13.7 SETTING AIS DESTINATION SHIP".
Displaying AIS data
1 Turn the [MULTI] control to select "AIS", then press the soft key 3
"Setting/Release".
When "Numerical Data" is displayed above the soft key 1
When "Retrieved Vessel" is displayed above the soft key 1
When "DEST Ship" is displayed above the soft key 1
The specified target data is displayed and the symbol is changed.
The target data will remain on the radar display until the target is lost, or until
another target is designated.
When the target for the numerical display is set, "#" is displayed in the AIS list.
"#" disappears when the target is released.
When the AIS retrieved vessel is set, "*" is displayed in the AIS list.
"*" disappears when it is released.
To Next Page
Loading...
Need help?
General
