JRC JMA-3300 Series - Page 235

Chapter 4

MAINTENANCE
4.5

FAULT FINDING
4-27
4
INSTRUCTION MANUAL
Alarm name
(Japanese)
Alarm name
(English)
Class Description
ࢫࢱࣥࣂ࢖୰࡛ࡍ Scanner Standby Status The functions which are available only during transmitting are
operated during standby (or preheating).
y Setting Timed TX to on.
Cursor operations during standby (no graphic display is available).
y Custom position setting for off center.
y Inputting/erasing/moving marks
y Inputting/erasing/moving/inserting lines
y Floating position setting for EBL.
y Floating position setting for VRM.
y Floating position setting for parallel cursor.
y TT acquisition/release/numerical display selection.
y AIS numerical display/destination ship/retrieved vessel
selection
y Alarm area creation
㧗⦋ᗘ࣮࢜ࣂ࣮ High Latitude Status Operations for the position of latitude 80 degrees or more.
y MOB input
y Event mark input
y Inputting/moving marks
y Inputting/moving/inserting lines
y Floating position setting for EBL latitude/longitude.
y Floating position setting for VRM latitude/longitude.
y Floating position setting for parallel cursor latitude/longitude.
y Creating latitude/longitude alarm area.
↓ຠ࡞ࣂ࣮ࢪ࡛ࣙࣥࡍ Invalid Version Status Program is loading a file with an incompatible version.
y Internal Setting
y Marks/lines
y Own track
y Option languages
y STC curve
y Color
Flash ROM ␗ᖖ Flash ROM Error Alarm Initialization error of flash ROM file system during startup.
USB ␗ᖖ USB Error Alarm Initialization error of USB during startup.