Chapter 4
MAINTENANCE
4.5
FAULT FINDING
4-26
Alarm name
(Japanese)
Alarm name
(English)
Class Description
᪉/⦋ᗘ⤒ᗘ ↓ࡋ No HDG/POSN Data Status Cursor operations when own heading or latitude/longitude is
disabled
y MOB input
y Event mark input
y Inputting/erasing/moving marks
y Inputting/erasing/moving/inserting lines
y Floating position setting for EBL latitude/longitude.
y Floating position setting for VRM latitude/longitude.
y Floating position setting for parallel cursor latitude/longitude
y AIS numerical display/destination ship/retrieved vessel
selection
y Creating latitude/longitude alarm area.
y TLL transmission for cursor.
࡛ࡁࡲࡏࢇ Not Allowed Status y Operations for inserting by selecting the end point in the line
list.
y Operations for switching to H-UP during TM
(When heading is not available, temporarily changed to
RM-HUp, therefore, message is disabled.)
タᐃྍ࡞ࣞࣥࢪ࡛ࡍ Range Scale Limit Status Operations functionally restricted for certain range.
y Zoom operations in range where zoom is not available.
y Off center operations in range where off center is not available.
y TM setting operations in range where TM setting is not
available.
ࢹ࣮ࢱࡀ࠶ࡾࡲࡏࢇ No Valid Data Status Operations without data.
y Displaying history menu without history data.
y Operations for editing/erasing in the mark list while there is no
mark.
y Operations for editing/erasing/inserting in the line list while
there is no line.
To Next Page
Loading...
Need help?
General
