Chapter 4
MAINTENANCE
4.5
FAULT FINDING
4-25
4
INSTRUCTION MANUAL
Alarm name
(Japanese)
Alarm name
(English)
Class Description
タᐃࡉࢀ࡚࠸ࡲࡏࢇ Unsetting Status y Menu display operations when all soft key menu/multi control
menu items are turned off
y Area creation operations for alarm class=Off
y EBL bearing setting while EBL is off
y Floating setting while EBL/VRM is off
y VRM range setting while VRM is off
y Bearing/width setting while parallel cursor is off
y Manual tuning setting while automatic tuning is on
y AIS operations while AIS function is off
y TT operations while TT function is off
y Operations to display the weather information while no
observation point is selected
᭱ࣞࣥࢪ࡛ࡍ MAX Range Scale Status Range up operations at the maximum range
᭱ᑠࣞࣥࢪ࡛ࡍ MIN Range Scale Status Range down operations at the minimum range
↓ຠ್࡛ࡍ Invalid Data Status Cannot function due to invalid value
y Invalid code is input for the code input screen
᧯స୰࡛ࡍ In Operation Status This operation is disabled due to another operation
y Setting enable/disable and class during alarm area creation
y Setting operations for on/off and floating position during EBL
bearing setting
y Setting operations for on/off and bearing during EBL floating
position setting
y Operations for on/off during VRM range setting
y Operations for on/off, mode and saving during off center
custom position setting
y Operations for PRF tuning during manual tuning operations
y Setting for automatic/manual mode during manual tuning
operations
y Operations for manual tuning during PRF tuning operation
To Next Page
Loading...
Need help?
General
