Chapter 2
OPERATIONS
2.7
SOFT KEY OPERATION
2-45
2
INSTRUCTION MANUA
Displaying the other tracking target data
Note:
z The numerical display can be operated when
Soft key 4: Target Select
are selected.
z Displaying tracking target data
1 Turn the [MULTI] control to select the target for the numerical display, then
press the soft key 3 "Setting/Release".
The specified target data is displayed and the symbol is changed.
The target data will remain on the radar display until the target is lost and its vector
disappears, or until another target is designated.
When the target for the numerical display is set, "#" is displayed in the TT list.
"#" disappears when the target is released.
Reference:
y If a target with the mark “ۑ” is designated, only its true bearing and range will appear
until its vector appears.
y Tracking target data is displayed when the soft key 4 is set to "TT Detail" in the section
"2.7.11 SETTING DISPLAY SCREEN".
z Releasing tracking target data display
1 Turn the [MULTI] control to select the target for the numerical display, then
press the soft key 3 "Setting/Release".
Numerical data display is released.
To Next Page
Loading...
Need help?
General
