PREFACE & CHECKING THE SUPPLIED ITEMS
x
PREFACE
Thank you very much for purchasing the JRC marine radar equipment, JMA-3400 series.
This equipment is a marine radar equipment designed to obtain safe operation of marine ships.
This equipment consists of a scanner unit and a display unit as its main units.
z Before operating the equipment, be sure to read this instruction manual carefully for correct
operation.
z Maintain this instruction manual so that operators can refer to it at anytime.
Refer to this manual when any inconvenience or defect occurs.
About equipment type names:
JMA-3400 is a radar series model name.
Individual name is changed according with the combination of units.
JMA-3400 Series
JMA-3404 Display Unit NCD-2364 + Scanner Unit NKE-2043
JMA-3406 Display Unit NCD-2364 + Scanner Unit NKE-2063A/AHS
JMA-3411-4 Display Unit NCD-2364 + Scanner Unit NKE-2103-4/4HS
JMA-3411-6 Display Unit NCD-2364 + Scanner Unit NKE-2103-6/6HS
CHECKING THE SUPPLIED ITEMS
STANDARD SUPPLY ITEMS
Standard supply items are as follows.
Optional special length cables are prepared by JRC if request.
Option cable is provided with a length of 5m, 10m, 15m, 20m, or 30m. (Please order it if
necessary)
SCANNER UNIT 1 set / DISPLAY UNIT 1 set
POWER CABLE (DC input cable 3m) 1 Piece
INSTRUCTION MANUAL 1 Piece (This book)
NOTE:
This radar display is possible to use AIS, TT, LL_ position, Depth, and N-UP functions.
But those all functions need the signal input from GPS, AIS, GYRO, LOG, ECHO SOUNDERS.
ALL external signals are connected using NMEA cable. This cable is sold separately as an
optional accessory, it is not included in the standard supply items.
OPTION UNITS (Not included in standard supplied items)
Please order to JRC agent or factory if necessary.
SCANNER to DISPLAY Cable: 5m, 10m, 15m, 20m, 30m
NMEA Signal connection cable: GPS, NMEA0183, CAN
Rubber cap for SCANNER to DISPLAY Cable
To Next Page
Loading...
Need help?
General
