JRC JMA-3406 - Ais Function (Standard Built In); Tt Function (Standard Built In)

Chapter 13 SPECIFICATIONS
2
3
2
13.6.3 AIS FUNCTION (STANDARD BUILT IN)
1) Display
Number of targets Up to 100 targets (stores up to 1,000 ship static data)
Target information Displays MMSI, call sign, ship name, COG, SOG,
CPA, TCPA, direction, distance.
Filters Distance only (initial setting value 20NM)
Constant information display 1 ship
The AIS information of the selected ship can be displayed
on the screen constantly (exclusive to the TT constant
information display).
Dangerous ship targets No CPA/TCPA decision
2) Operation Built-in
3) Installation NMEA1~3, NMEA4 (GPS) available
13.6.4 TT FUNCTION (STANDARD BUILT IN)
1) Acquisition MANUAL㸪AUTO (by guard zone)
2) Tracking 30 targets (up to 20 targets for automatic tracking)
3) Display
Constant information display 1 ship
The TT information of the selected 1 ship can be displayed
on the screen constantly (exclusive to the AIS constant
information display).
Maximum tracking range 20NM (This varies depending on the range)
Target information Displays items are true bearing, distance, true course, and
true speed.
Display of Vectors True/Relative
Dangerous ship targets Decision by CPA/TCPA
4) Operation Built-in