Chapter 5 VARIOUS FUNCTIONS
7
5.21.3 OWN SHIP VECTOR LINE WIDTH
Set the width of own ship vector line.
5.22 OFFCENTER SETTING
The display of own ship's position can be moved to any position within 66% of the display radius.
This setting can be unset.
Select “Remove”, the set position is cancelled.
䐟 Press the MENU button.㻌
䐠 Select “Offcenter.”㻌
䐡 Select “Set Position.”㻌
䐢㻌 Menu display is disappeared and screen
display become Set Position mode.㻌
䐣 Operate the cross key or the MULTI
control to set the position.
䐤 Press the ENT button or the MULTI control, the position
is set and the own ship's display position is moved.
To cancel the position setting,
press the CLR button before setting.
Regardless of own ship motion mode of TM / RM, the display position
of own ship will be reset to the center of the screen.
To Next Page
Loading...
Need help?
General
