Chapter 5 VARIOUS FUNCTIONS
74
5.10 LINE FUNCTION
Lines can be indicated at any positions on the screen.
A line created on the screen holds the latitude and longitude.
Make Line
Press
Press
Press
Press
Long press
Turn
Long press MULTI at the last point.
The start point is set.
The cursor shape is changes.
The cursor shape changes.
Operation of the MULTI control:
Turn left: moves the cursor to left.
Turn right: moves the cursor to right.
Turn left while pressing: moves the cursor down.
Turn right while pressing: moves the cursor up.
Place the middle point.
A line can be drawn with the placed
point as the starting point again.
or
Cross Key
Hint: Placing the middle point or last point can controlling
by Cross courser key and “ENT” key.
To Next Page
Loading...
Need help?
General
