2
1
Chapter 10 MAINTENANCE AND CHECK
10.3.4 SCANNER INFORMATION
Displays the following scanner information.
z Scanner Transmit Power
z Motor Type
z Magnetron Current
10.3.5 HARDWARE INFORMATION
Displays the following hardware information.
z Serial Number
z MAC Address
z Temperature
z Monitor Brilliance (no uint)
10.3.6 ERROR LOG
The error log displays previously occurred system alarms with the dates and times when they occurred.
10.3.7 LINE MONITOR
Serial communication data can be seen on the built-in Line monitor.
Line monitor can be used to make sure that the serial data are received properly.