APPENDIX
A-12
Item Setting Contents
3. Trails Mode True / Relative
7. Vector
1. Vector Mode True / Relative
2. Display Own Ship’s Vector Off / On
3. Own Ship Vector Line Width 1䡚5
8. Offcenter
1. Set Position
2. Remove
9. Function Setting
1. Standard
1. Function Enable/Disable Off / On
2. IR OFF / Low / Middle / High
3. Process
OFF / 3Scan CORREL / 4Scan CORREL / 5Scan CORREL / Remain / Peak
Hold
4. Target Enhance OFF / Level1 / Level2 / Level3
5. AUTO STC/FTC OFF / AUTO STC / AUTO FTC / AUTO STC + AUTO FTC
6. Video Latitude Narrow / Normal / Wide1 / Wide2 / MAX
7. Video Noise Rejection OFF / Level1 / Level2 / Level3
8. Trails Interval
Short䠖OFF / 15sec / 30sec / 1min / 2min / 3min / 4min / 5min / 6min / 10min /
15min / Continuous
Middle䠖OFF / 30sec / 1min / 2min / 3min / 4min / 5min / 6min / 10min / 15min /
30min / Continuous
Long䠖OFF / 1min / 2min / 3min / 4min / 5min / 6min / 10min / 15min / 30min /
1time / Continuous
Super long䠖OFF / 30min / 1time / 2time / 3time / 4time / 5time / 6time / 10time
/ 12time / 24time / Continuous
9. Trails Mode True / Relative
10. Threshold Level1 / Level2 / Level3 / Level4
11. Time/All Combine OFF / ON
12. MAX Interval Short / Middle / Long / Super Long
13. PRF Normal / Economy / High Power
14. Antenna Height -5m / 5-10m / 10-20m / 20m - / USER
15. Save Present State
16. Reset To User Default
17. Initialize
2. Coast Same setting as standard
3. Deepsea Same setting as standard
4. Fishnet Same setting as standard
5. Bird Same setting as standard
6. User Same setting as standard
10. AIS / TT
1. TT Function On/Off OFF / ON
2. AIS Function On/Off OFF / ON
3. CPA Limit 0.0䡚9.9NM
4. TCPA Limit 0䡚99min
5. CPA Ring OFF / ON
6. TT Target Number Display OFF / ON
7. AIS Target Number Display OFF / ON
8. Target Number Allocation OFF / ON
1. TT 00䡚70
2. AIS 100䡚900
9. TLL Target Number Allocation
1. Allocation Own Ship䇻s / Cursor
2. Own Ship䇻s 00䡚99
To Next Page
Loading...
