Jan 8, 2005
- 5 -
24V(+)
24V(+)
BATT
Connect to the DC
Terminal No.3-No.6
(13) Insert this Breaker cable inside the rail and fix to the bracket as shown below.
(14) Connect the Breaker cable numbered from 3 to 6 to the DC terminal respectively as
follows.
Cable
No.
Terminal No. Names
3 3 24V(+)
4 4 24V(+)
5 5 24V(-)
6 6 24V(-)
Wire to coincide with the cable number and terminal number.
(15) Connect the Breaker Cable and the BATT Cable to the Breaker with four
M5X8-screws contained in the Breaker Addition Kit.
Fixing position mark
Fix the BATT cable with another
cable band.
Bracket
Rail
To Next Page
Loading...
