Attached documents 3
12/23
4.5 Click the “Upgrade” button.
(*)
When alarm message is displayed, redo from 4.2 after checking the setting according to the
message.
4.6 Confirm that the message of “Turn ON NAH-692/695/698 and JSB-196GM within 60 seconds” is
displayed on the “Operation” text box.
4.7 In case of JSS-296/596/896, turn on the AC and DC switches of NAH-692/695/698.
4.8 Turn on the JSB-196/JSB-196GM.
4.9 Confirm that the message of “Wait for a while without operating equipment.” is displayed on the
“Operation” text box.
(*)
When alarm message is displayed, redo from 4.2 after checking the setting according to the
message.
To Next Page
Loading...
