Juniper EX2300 Series - Page 194

Maintain > Update J-Web side pane. By default, the Check for update automacally on every
login is selected.
• If you choose Update Later , you can update to the latest J-Web Applicaon package by
clicking the orange icon next to Update Available on the top pane of the J-Web interface or
through Maintain > Update J-Web.
The dashboard comprises a graphical chassis viewer and four panels.
Graphical Chassis Viewer
The Dashboard panel displays a graphical view of the chassis of a switch. In a Virtual Chassis, it displays
a graphical view of each member switch.
In a Virtual Chassis, the default values are shown on the Dashboard panel when no chassis image is
clicked. The panel displays the value for a switch if you click its image.
NOTE:
• If the member switch is not present, inacve, or not provisioned, you cannot expand the
member switch image.
In J-Web Applicaon package Release 14.1X53-A2, you can form a Virtual Chassis using
EX4600 and EX4300 switches. When in a mixed Virtual Chassis consisng of EX4600
switches and EX4300 switches, the EX4600 switches can be the primary, backup, or in the
linecard role, while the EX4300 switches must be in the linecard role.
• Starng in J-Web Applicaon Package Release 19.2A1, J-Web supports EX4650 switches.
NOTE: For EX4650 switches, chassis viewer supports only the standalone view and
does not support the Virtual Chassis conguraon.
Table 39 on page 186 lists the details that are displayed on each member switch.
185