Juniper EX2300 Series Hardware Guide

Table 40: Status of a Member Switch in a Virtual Chassis (Connued)
If the member switch is It appears as It means the member switch
Not provisioned dimmed and
Unprvsnd
Cannot synchronize with the exisng preprovisioned Virtual Chassis.
Click Rear View for a graphical view of the rear panel of the switch.
Click Preferences to choose which panels must be displayed and set the refresh interval for chassis
viewer informaon. Click OK to save your changes and return to the dashboard or click Cancel to return
to the dashboard without saving changes.
NOTE: You can drag the various panels to dierent locaons in the J-Web window.
System Informaon Panel
Table 41: System
Informaon
Field Descripon
System name Indicates the local name of the EX Series switch. The
local name of the EX Series switches changes when an
individual image is clicked.
For EX4650 switches, indicates the host name of the
switch. Specic host name of the EX4650 switch is
displayed when you click on the individual line card.
187

Juniper EX2300 Series Specifications

General

Software	Junos OS
Model	EX2300
Ports	24 or 48 10/100/1000BASE-T ports
Uplinks	4 x 1GbE/10GbE SFP+/SFP uplinks
Power Supply	Internal or external power supply options
Rack Units	1U
PoE/PoE+ Ports	Available on some models (EX2300-C and EX2300)
Operating Temperature	0° to 45°C
Input Voltage	100 to 240 VAC
Layer 3 Features	RIP, OSPF, VRRP
Layer 2 Features	VLAN, STP, RSTP, MSTP, LACP
Security Features	802.1X, DHCP snooping
Management	CLI, Web UI, SNMP