Juniper EX2300 Series Hardware Guide

Table 41: System Informaon (Connued)
Field Descripon
Inventory details Indicates the following:
• For EX3200 switches; and for EX2200, EX2200-C,
EX3300, EX4200, EX4300, EX4500, EX4550, and
EX4600 switches that are not congured as Virtual
Chassis, the value displayed in Inventory details
eld is always 1 FPC. FPC is a legacy term for a slot
in a large Juniper Networks chassis; which simply
refers to the standalone switch.
•
For EX2200 and EX2200-C switches congured as
a Virtual Chassis, the value displayed in the
Inventory details eld is 1–4 FPC, with the number
corresponding to the number of member switches.
•
For EX3300 switches congured as a Virtual
Chassis, the value displayed in the Inventory details
eld is 1–6 FPC, with the number corresponding to
the number of member switches.
NOTE: For Junos OS Release 14.1X53-D10 and
later, EX3300 switches congured as a Virtual
Chassis display the value 1–10 FPC in the
Inventory details eld.
• For EX4200, EX4500, EX4550, and EX4600
switches congured as a Virtual Chassis, the value
displayed in the Inventory details eld is 1–10 FPC,
with the number corresponding to the number of
member switches.
• For EX4650 switches, the value displayed in
Inventory details eld is equal to the number of
FPCs.
• For EX6210 switches, the values displayed in the
Inventory details eld are 1–2 CB and 1–9 FPC. CB,
or Control Board, refers to the SRE module. FPC
refers to line cards and the FPC within the CB.
189

Juniper EX2300 Series Specifications

General

Software	Junos OS
Model	EX2300
Ports	24 or 48 10/100/1000BASE-T ports
Uplinks	4 x 1GbE/10GbE SFP+/SFP uplinks
Power Supply	Internal or external power supply options
Rack Units	1U
PoE/PoE+ Ports	Available on some models (EX2300-C and EX2300)
Operating Temperature	0° to 45°C
Input Voltage	100 to 240 VAC
Layer 3 Features	RIP, OSPF, VRRP
Layer 2 Features	VLAN, STP, RSTP, MSTP, LACP
Security Features	802.1X, DHCP snooping
Management	CLI, Web UI, SNMP