Table 41: System Informaon
(Connued)
Field Descripon
• For an EX8208 switch, the values displayed in
Inventory details eld are 1–3 CB and 0–8 FPC. CB,
or Control Board, refers to SRE and SF modules.
FPC refers to line cards.
• For EX8216 switches, the values displayed in
Inventory details eld are 1–2 CB and 0–16 FPC.
CB, or Control Board, refers to RE modules and
FPC refers to line cards.
• For an XRE200 External Roung Engine in an
EX8200 Virtual Chassis, the value displayed in
Inventory details is 1 XRE. XRE refers to RE
modules. For XRE200 External Roung Engines
congured as a Virtual Chassis, the values displayed
in Inventory details are 1–2 XRE and 0–4 LCC,
where LCC refers to the EX8200 line card chassis.
Junos image Indicates the version of the Junos OS image. In a
Virtual Chassis conguraon, the Junos OS image of
the primary switch is displayed by default. To display
the Junos OS image of a specic switch, click the
image of that switch.
NOTE: For EX4650 switches, the Junos OS image of
the primary is displayed by default. To display the
Junos OS image of a specic switch, click the image of
that switch.
Boot image Indicates the version of the boot image that is used. In
a Virtual Chassis conguraon, the boot image of the
primary switch is displayed by default. To display the
boot image of a specic switch, click the image of that
switch.
NOTE: For EX4650 switches, the boot image of the
primary switch is displayed by default. To display the
boot image of a specic switch, click the image of that
switch.
190
To Next Page
Loading...
Need help?
General
