Juniper EX2300 Series Hardware Guide

Purpose
NOTE: This topic applies only to the J-Web Applicaon package.
Use the monitoring funconality to lter and view system log messages for EX Series switches.
Acon
To view events in the J-Web interface, select Monitor > Events and Alarms > View Events.
Apply a lter or a combinaon of lters to view messages. You can use lters to display relevant events.
Table 59 on page 237 describes the dierent lters, their funcons, and the associated acons.
To view events in the CLI, enter the following command:
show log
Table 59: Filtering System Log Messages
Field Funcon Your Acon
System Log File Species the name of a system log le
for which you want to display the
recorded events.
Lists the names of all the system log les
that you congure.
By default, a log le, messages, is included
in the /var/log/ directory.
To specify events recorded in a parcular
le, select the system log lename from
the list— for example, messages.
Select Include archived les to include
archived les in the search.
Process Species the name of the process
generang the events you want to
display.
To view all the processes running on
your system, enter the CLI command
show system processes.
For more informaon about processes,
see the Junos OS Installaon and
Upgrade Guide
.
To specify events generated by a process,
type the name of the process.
For example, type mgd to list all messages
generated by the management process.
237

Juniper EX2300 Series Specifications

General

Software	Junos OS
Model	EX2300
Ports	24 or 48 10/100/1000BASE-T ports
Uplinks	4 x 1GbE/10GbE SFP+/SFP uplinks
Power Supply	Internal or external power supply options
Rack Units	1U
PoE/PoE+ Ports	Available on some models (EX2300-C and EX2300)
Operating Temperature	0° to 45°C
Input Voltage	100 to 240 VAC
Layer 3 Features	RIP, OSPF, VRRP
Layer 2 Features	VLAN, STP, RSTP, MSTP, LACP
Security Features	802.1X, DHCP snooping
Management	CLI, Web UI, SNMP