Juniper QFX5240 - QFX5240 AC Power Supply Module Description; AC Power Cord Specifications

QFX5240 AC Power Supply Module Descripon
Each 3000‑W AC power supply module (PSM) has a single AC input and provides 12‑V power to the
system. The PSM's output power is 2.7 KW for the input voltage range of 200 VAC through 240 VAC.
See Figure 16 on page 29.
Figure 16: AC Power Supply Module
1—
Power connector
4—
Handle
2—
PSM LED
5—
Velcro strap for cable management
3—
Ejecon lever
AC Power Cord Specicaons
Detachable AC power cords are shipped with the chassis if you include them as part of your order.
NOTE: In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters)
in length, to comply with Naonal Electrical Code (NEC) Secons 400-8 (NFPA 75, 5-2.2) and
210-52, and Canadian Electrical Code (CEC) Secon 4-010(3). The cords that can be ordered for
the QFX Series switches are in compliance.
Table 9 on page 30 lists AC power cord specicaons provided for each country or region.
29