Juniper QFX5240 - Fast Track to Rack Installation and Power; Install the QFX5240 Switch in a Rack

Fast Track to Rack Installaon and Power
SUMMARY
This procedure walks you through the most basic
steps for installing your QFX5240 switch in a rack
and connecng it to power.
IN THIS SECTION
Install the QFX5240 Switch in a Rack | 2
Connect to Power | 8
Install the QFX5240 Switch in a Rack
SUMMARY
To mount the QFX5240 switch on a four-post rack
using the QFX5240-2U-4PRMK rack mount kit
(RMK).
IN THIS SECTION
Prepare the Slide Rail Assembly to Install in
the Rack | 2
Install the Slide Rail Assembly in the
Rack | 4
Mount the Switch in the Rack | 6
1. Unpack the switch and place it on a at stable surface.
2. Verify the parts received.
3. Ensure that you have the following tools and parts available:
• An ESD grounding strap—not provided
• QFX5240-2U-4PRMK rack mount kit—provided
a. Two slide rail assemblies
b. One packet of screws
Prepare the Slide Rail Assembly to Install in the Rack
The slide rail assembly consists of three parts:
2