Juniper QFX5240 - Register Products-Mandatory to Validate Slas; Mount the QFX5240 Switch in a Four-Post Rack by Using the QFX5240-2 U-4 PRMK Rack Mount Kit

NOTE: We no longer include a DB-9 to RJ-45 cable or a DB-9 to RJ-45 adapter with a CAT5E
copper cable as part of the device package. If you require a console cable, you can order it
separately with the part number JNP-CBL-RJ45-DB9 (DB-9 to RJ-45 adapter with a CAT5E
copper cable).
Register Products—Mandatory to Validate SLAs
Register all new Juniper Networks hardware products and changes to an exisng installed product using
the Juniper Networks website to acvate your hardware replacement service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website. Update
the installaon base data if any addion or change to the installaon base occurs or if
the installaon base is moved. Juniper Networks is not responsible for not meeng the
hardware replacement service-level agreement for products that do not have registered
serial numbers or accurate installaon base data.
Register your product(s) at hps://tools.juniper.net/svcreg/SRegSerialNum.jsp.
Update your installaon base at hps://www.juniper.net/customers/csc/management/
updateinstallbase.jsp.
Mount the QFX5240 Switch in a Four-Post Rack by Using the
QFX5240-2U-4PRMK Rack Mount Kit
IN THIS SECTION
Before You Begin Rack Mounng | 73
Mount the QFX5240 in a Four-Post Rack | 74
You can mount QFX5240 switches only on a four-post 19-in. rack using the QFX5240-2U-4PRMK rack
mount kit provided with the switch. The rack mount kit can be adapted for a four-post rack-only
installaon. A four-post installaon evenly supports the chassis by all four corners.
72