Juniper QFX5240 - RJ-45 Management Port Connector Pinout Information

Table 19: Cable Specicaons for Console and Management Connecons for the QFX Series
(Connued)
Port on QFX Series Device Cable Specicaon Maximum Length Device Receptacle
Management port Category 5 cable or equivalent
suitable for 1000BASE-T operaon
328 feet (100 meters) RJ-45
NOTE: We no longer include a DB-9 to RJ-45 cable or a DB-9 to RJ-45 adapter with a CAT5E
copper cable as part of the device package. If you require a console cable, you can order it
separately with the part number JNP-CBL-RJ45-DB9 (DB-9 to RJ-45 adapter with a CAT5E
copper cable).
RJ-45 Management Port Connector Pinout Informaon
Table 20 on page 55 provides the pinout informaon for the RJ-45 connector for the management port
on Juniper Networks devices.
Table 20: RJ-45 Management Port Connector Pinout
Informaon
Pin Signal Descripon
1 TRP1+ Transmit/receive data pair 1
2 TRP1- Transmit/receive data pair 1
3 TRP2+ Transmit/receive data pair 2
4 TRP3+ Transmit/receive data pair 3
5 TRP3- Transmit/receive data pair 3
6 TRP2- Transmit/receive data pair 2
55