Juniper QFX5240 - Page 5

Mount the QFX5240 Switch in a Four-Post Rack by Using the QFX5240-2U-4PRMK Rack
Mount Kit | 72
Before You Begin Rack Mounng | 73
Mount the QFX5240 in a Four-Post Rack | 74
Connect the QFX5240 Switch to Power | 79
Ground the QFX5240 Switch | 79
How to Connect AC Power to a QFX5240 Switch | 81
Connect the QFX5240 Switch to External Devices | 83
Connect a Device to a Network for Out-of-Band Management | 83
Connect a Device to a Management Console Using an RJ‑45 Connector | 84
Perform Inial Soware Conguraon for QFX5240 Switches | 86
5
Maintaining Components
Maintain the QFX5240 Cooling System | 90
Remove a Fan Module from QFX5240 Switches | 90
Install a Fan Module in QFX5240 Switches | 92
Maintain the QFX5240 Power System | 93
Remove a Power Supply Unit from QFX5240 Switches | 93
Install an AC Power Supply Unit in QFX5240 Switches | 95
Maintain the Solid-State Drive in a QFX5240 Switch | 96
Remove a Solid-State Drive from a QFX5240 Switch | 96
Install a Solid-State Drive in a QFX5240 Switch | 98
Maintain Transceivers and Fiber Opc Cables on a QFX5240 Switch | 100
Remove a Transceiver | 100
Install a Transceiver | 103
Disconnect a Fiber-Opc Cable | 106
Connect a Fiber-Opc Cable | 107
How to Handle Fiber-Opc Cables | 108
v