The two grease nipples of the canopy hinges are accessible only when the canopy is opened.
1.
Loosen the snap fasteners securing the cover.
2. Open the canopy 1
.
3.
Find the two grease nipples.
4. Grease the nipples 3
with the grease injector 2 until new grease emerges.
Further information For the greasing interval of the canopy hinges see the maintenance plan in chapter 10.2.4.
10.5.7 Maintain rubber sealing strips
The rubber sealing strips between the lower body and the canopy serve both as a soundproofing
measure and to prevent ingress of rain water.
Care of the rubber sealing strips is very necessary during the winter months to prevent the strips
from sticking and tearing when the canopy is opened.
➤
Lubricate the rubber sealing strips regularly with silicone oil or Vaseline.
10.6 Options
➤ Carry out maintenance tasks in accordance with the schedules in chapter 10.2.5 .
10.6.1 Option ea
Tool lubricator maintenance
Material Tool oil (special lubricant for road breakers),
Funnel
Cleaning cloths
Precondition The machine is shut down.
The machine is fully vented, the pressure gauge reads 0 psig.
Machine cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
10 Maintenance
10.6 Options
102
SERVICE MANUAL Screw Compressor
M26
No.: 9_9446 01 USE
To Next Page
Loading...
