Electricity
➤
Allow only qualified and authorized electricians or trained personnel under the supervision of a
qualified and authorized electrician to carry out work on electrical equipment according to elec‐
trical engineering regulations.
➤ Check regularly that all electrical connections are tight and in order.
➤ Only qualified and authorized electricians may carry out work on the generator or generator
control box.
➤ Never carry out work on the generator or generator control box unless the machine is shut
down.
High temperature
➤ Avoid contact with hot components. These include, for example, engine, compressor airend, oil
and compressed air lines, coolers and oil separator tank.
➤ Wear protective clothing.
➤ If welding is carried out on or near the machine, take adequate measures to prevent sparks or
heat from igniting fuel or oil vapors or parts of the machine.
Noise
➤ Operate the machine only with intact soundproofing.
➤ Open machine access doors for checks for a short period only.
➤ Wear hearing protection if necessary. The pressure relief valve blowing off, for example, can
be particularly loud.
Operating materials
➤ Strictly forbid fire, open flame and smoking.
➤ Follow safety regulations when dealing with fuel, lubricants, antifreeze and chemical substan‐
ces.
➤ Avoid contact with skin and eyes.
➤ Do not inhale fumes or aerosols from fuel or oil.
➤ Do not eat or drink while handling fuel, cooling and lubricating fluids or antifreeze.
➤ Keep suitable fire extinguishing agents ready for use.
➤ Use only KAESER approved operating materials.
Unsuitable spare parts
➤ Use only spare parts approved by the manufacturer for use in this machine. Unsuitable spare
parts compromise the safety of the machine.
➤ Use only genuine KAESER pressure components.
Conversion or modification of the machine
➤ Do not permit conversion or modification of the machine as this can compromise function and
safe working.
3.5.2 Safe machine operation
Information on conduct that will help in handling the machine safely is listed here.
3 Safety and Responsibility
3.5 Dangers
18
SERVICE MANUAL Screw Compressor
M26 No.: 9_9446 01 USE
To Next Page
Loading...
