1.
Straps can damage the bodywork.
Movement during transportation can damage the bodywork.
➤ Do not use straps over the bodywork.
➤ Only use straps over the chassis.
2. Always observe valid accident and safety regulations when transporting.
3. The loads must be secured against rolling, tipping, slipping and falling.
If you have any questions relating to transport and load securing, please contact KAESER
Service.
KAESER accepts no liability and provides no guarantee for any damage arising from unpro‐
fessional transport, or from insufficient or incorrect load securing.
For rental, hire or trade-fair plant, any transportation securing devices used for transport on
the way there, may also be used for the return transport.
Before shipment as air freight
The machine is designated as dangerous goods for air freight purposes; any disregard can result in
a heavy fine.
1.
Danger of fire or explosion from operating fluids/materials.
The machine incorporates an internal combustion engine.
➤ Any dangerous fluids/materials contained within the machine must be removed before
transport.
2. Remove all dangerous fluids/materials.
These include:
■ Residues of fuel or fuel vapors
■ Lubricating and cooling oils in the engine and compressor unit
■ Battery electrolyte
12.3 Storage
Moisture can lead to corrosion, particularly in the engine, airend and oil separator tank.
Frozen moisture can damage components, valve diaphragms and gaskets.
Advice can be obtained from KAESER on storage and commissioning.
Moisture and frost can damage the machine.
➤ Prevent ingress of moisture and formation of condensation.
➤ Maintain a storage temperature of >32 °F.
➤ Store the machine in a dry place, free from frost if possible.
12.4 Disposal
When disposing of a machine, drain out all liquids and remove old filters.
Precondition The machine is decommissioned.
12 Decommissioning, Storage and Transport
12.3 Storage
176
SERVICE MANUAL Screw Compressor
M26
No.: 9_9446 01 USE
To Next Page
