KAESER M26 - Annex; Marking; Pipeline and instrument flow diagram (P+I diagram)

6. Connect the cable for the lighting and indicator systems and carry out a function check.
7.
Remove the chocks.
Carry out the following before starting to tow
1. Check that the coupling is properly latched onto the towing hitch.
2. Check that the towbar is adjusted to the correct height. See also chapter 6.3.
Check that:
■ The teeth in the tow bar height adjusting joints are fully engaged
■ The locking levers are tightened
■ The split pin is fully inserted.
3. Wind the jockey wheel to its uppermost position.
4. Check that the wheels are securely fitted and the tires are in good condition.
5. Check the tire pressures.
6. Connect the cable for the lighting and indicator systems and carry out a function check.
7. Release the parking brake and remove the chocks from under the wheels.
Carry out the following before starting to tow
1. Check that the coupling is properly latched onto the towing hitch.
2. Wind the jockey wheel to its uppermost position.
3. Check that the wheels are securely fitted and the tires are in good condition.
4. Check the tire pressures.
5. Connect the cable for the lighting and indicator systems and carry out a function check.
6. Release the parking brake and remove the chocks from under the wheels.
Carry out the following before starting to tow
Fig. 45 Safety sign - secure the chocks
1.
Missing chocks
Serious injury or death can result from an unchocked machine rolling away.
➤ Secure the chocks in the transport securing device before transporting the machine.
➤ Replace missing chocks immediately.
2. Check that the coupling is properly latched onto the towing hitch.
3. Wind the propstand to its uppermost position.
4. Check that the wheels are securely fitted and the tires are in good condition.
5. Check the tire pressures.
6. Attach the lighting and indicator systems and carry out a function check.
7. Remove the chocks and secure them in the transport securing device.
12 Decommissioning, Storage and Transport
12.2 Transporting
170
SERVICE MANUAL Screw Compressor
M26
No.: 9_9446 01 USE
Option sb
Option sd, se
Option sh
Option sh