Task See chapter Confirmed?
➤ Are the access doors closed and all body panels in place? –
➤ Are the tire pressures OK? –
Engine SM = engine manufacturer's service manual.
Tab. 44 Positioning and operating conditions checklist
7.4 After storing the machine for a long period
➤ Carry out the following before every re-commissioning after a long period of storage.
Storage
period longer
than
Action
5 months ➤ Remove the desiccant from the openings in the air intake filters of the engine
and compressor.
➤
Check the air and oil filters.
➤ Drain the preserving oil from the separator tank.
➤ Fill with compressor oil.
➤ Drain the preserving oil from the engine.
➤ Fill up with engine oil.
➤ Check the engine coolant
➤ Check the battery charge.
➤ Re-connect the battery.
➤ Check all fuel lines, engine oil lines and compressor oil lines for leaks, loose
connections, wear and damage.
➤ Clean the bodywork with a grease and dirt cleansing agent.
➤ Check the tire pressures.
36 months ➤ Have the overall technical condition checked by an authorized KAESER Ser‐
vice Technician.
Tab. 45 Measures for re-commissioning the compressor after a long period of storage
7.5 Low-temperature operation (winter)
The machine's electrical equipment is designed for starting at ambient temperatures as low as
14 °F.
➤
At temperatures below 32 °F use:
■ winter-grade engine oil,
■ low viscosity compressor oil
■ winter-grade diesel fuel
Use air hoses that are as short as possible under extremely cold conditions.
7 Initial Start-up
7.4 After storing the machine for a long period
50
SERVICE MANUAL Screw Compressor
M26 No.: 9_9446 01 USE
To Next Page
Loading...
