2.6.2 Oil recommendation
The engine oil must meet the following classification:
■
ACEA, class E4, E7
■ API, class CF, CI-4
The engine is filled initially with engine oil of viscosity class SAE 10 W / 40.
Ambient temperature [°F] Viscosity class
14 – 122 SAE 15 W / 40
−4 – 86 SAE 5 W / 30
−4 – 122 SAE 10 W / 40
Tab. 29 Engine oil recommendation
2.6.3 Engine coolant recommendation
The engine coolant must meet the requirements of specification ASTM D4985.
Do not use a common coolant / antifreeze that meets only the requirements of ASTM D3306.
Such coolants are intended only for light use in vehicles and could shorten the useful life of
the engine.
The engine service manual gives further information on coolant application.
2.6.4 Fluid volumes
Name Fluid volume [qt]
Engine oil 5.4
Fuel 31.7
Engine coolant 5.3
Tab. 30 Engine fluid volumes
2.6.5 Battery
Feature Value
Voltage [V] 12
Capacity [Ah] 44
PTC testing current [A]
(according to EN 50342)
360
Tab. 31 Battery
Further information Depending on machine equipment, a higher capacity battery may be required. See chapter 2.7.2
for low temperature equipment.
2 Technical Data
2.6 Engine
No.: 9_9446 01 USE
SERVICE MANUAL Screw Compressor
M26
11
To Next Page
Loading...
