KAESER M26 - Page 181

Serious injury or death can result from an unchocked machine rolling away.
➤ Securely chock the machine before uncoupling.
➤ As a general rule, the machine should always be chocked when it is not being moved.
➤ The machine should not be manoeuvred by hand.
2. Wind down the jockey wheel.
3. Place chocks under the wheels.
4. Dismantle the lighting and signalling system.
5. Uncouple the compressor from the towing vehicle.
■ Pull up the coupling release lever.
■ Lift the coupling off the towing hitch ball.
12.2.2.1 Option sf
Using the anti-theft device
Machine damage due to excessive static load on the axles
➤ Never place an excavator bucket as anti-theft protection on the machine's enclosure.
Use only the safety chain (available as option) to secure a parked machine against theft.
Precondition Safety chain present
Lock present
Key custody is decided
1. Remove the safety chain from the storage locker on the machine.
2. Loop the safety chain around a solidly anchored object.
3. Secure the chain with the lock.
Result The machine is protected against theft.
Releasing the anti-theft device prior to transport
Components may break.
➤ Release the chained machine.
The safety chain must be released prior to transport to prevent the destruction of machine compo‐
nents.
1. Open the lock.
2. Remove the safety chain from the solidly anchored object.
3. Place the safety chain in the storage locker on the machine.
Result Safety chain is released and stored.
12 Decommissioning, Storage and Transport
12.2 Transporting
No.: 9_9446 01 USE
SERVICE MANUAL Screw Compressor
M26
173
Option sf