MULTICAL® 403
Kamstrup A/S · Technical description · FILE100000166_B_EN-55121689_M1_07.2023
11.2.10 HC-003-34: wM-Bus, inputs (In-A, In-B),912,5/915/918,5 MHz
This module has been developed for Wireless M-Bus systems operating within the licence free band in the range
912.5…918.5 MHz.
The modules fulfil the requirements of the M-Bus standard EN 13757:2013.
The module can be configured with different datagrams.
11.2.11 HC-003-40: Analog outputs 2 x 0/4…20 mA
Analog outputs are often used to pass information to PLC’s or similar equipment.
The Analog outputs is based on flow, power or temperatures from the meter. The Analog outputs are individually
scale able and configurable as either 0...20 mA or 4...20 mA.
11.2.12 HC-003-42: KNX Comminication
The order number for the KNX module for MULTICAL® 403/603/803 is 87970.
The name is BCU-WMZ-KAM-MC603-c-FW.
' Please note that this module is not supplied by Kamstrup, and that questions about this should be addressed to
Lingg & Janke OHG, Germany.
11.2.13 HC-003-43: PQT Controller
The PQT Controller is for application to optimize energy
consumption. The PQT Controller reads the flow, power and
temperatures from the meter and together with the configured
setpoints the PQT Controller steers an attached motorized valve.
To Next Page
Loading...
Need help?
General
