MULTICAL® 403
Kamstrup A/S · Technical description · FILE100000166_B_EN-55121689_M1_07.2023
3.3 Data
The country code is selected as the last two characters of the meter’s static part of the type number.
In addition to being used to define the language on the meter label the country code is used to control the
configuration of certain meter data.
During production of MULTICAL® 403 it is programmed with a number of measuring values in the fields listed
overleaf. Unless the order includes specific requirements as to configuration, MULTICAL® 403 will be supplied with
the default values listed in the table.
Serial no. (S/N)
1
(See paragraph 3.4)
71.xxx.xxx - -
Customer no.
Display No. 1 = 8 digits MSD
Display No. 2 = 8 digits LSD
-
Up to 16 digits
Customer no. equal to S/N
Yearly target date 1 (MM.DD)
- MM=1-12 and DD=1-31
Depend on country code
Monthly target date 1 (DD)
- DD = 1-31
Yearly target date 2 (MM.DD)
-
MM=1-12 and DD=1-31 + 00,00
(disabled)
2
Monthly target date 2 (DD)
-
00 (disabled)
2
Averaging period for min./max. of
power (P) and flow (Q)
(See paragraph 7.5)
- 1…1440 min. 60 min.
Averaging period of CP
(See paragraph 7.2)
- 5…30 days 7 days
θ
hc
Heat/cooling shift
Only active if meter type 6 is selected
(See paragraph 7.4)
-
2…180,00 °C + 250,00 °C
3
Heat/cooling, meter type 6:
25,00 °C
Date/time
20YY.MM.DD/
hh.mm.ss
GMT ± 12,0 hours
(can be defined at half hour
-
Primary address for M-Bus
4
,
Modbus and BACnet
-
(depending on module)
Last 2-3 digits of customer
number
(used for secondary address)
- - Customer no.
wM-Bus ID-no. - - Serial number
To Next Page
Loading...
Need help?
General
