MULTICAL® 403
Kamstrup A/S · Technical description · FILE100000166_B_EN-55121689_M1_07.2023
Select a new period and new data registers in order to start a new data reading. If the previously read data values
have not been saved earlier, you will be asked if you want to save them.
Tables can be exported direct to ”Microsoft
Office Excel" or printed.
In order to zoom in; activate Zoom and select
the area, on which you want to zoom in. To
zoom out; double-click anywhere in the system
of coordinates.
In order to read current values from the graphs;
remove the marking from Zoom and let the
mouse cursor hover above the required point.
15 Approvals
15.1 Type approvals
MULTICAL® 403 is type approved according to MID on the basis of EN1434-4.
MULTICAL® 403 has a national Danish cooling approval, TS 27.02 009, according to BEK 1178 based on EN1434.
15.2 The Measuring Instruments Directive
MULTICAL® 403 is available with CE-marking according to MID (2014/32/EU). The certificates have the following
numbers:
B-Module: DK-0200-MI004-037
D-Module: DK-0200-MID-D-001
To Next Page
Loading...
Need help?
General
