MULTICAL® 403
Kamstrup A/S · Technical description · FILE100000166_B_EN-55121689_M1_07.2023
17 Disposal
Kamstrup A/S holds an environmental certification according to ISO 14001, and as part of our environment policy we
use materials which can be recovered environmentally correctly to the greatest possible extent.
• Disposal
Kamstrup A/S accept end-of-life MULTICAL
403
for environmentally correct disposal according to previous
agreement. The disposal arrangement is free of charge to the customer, except for the cost of transportation to
Kamstrup A/S or the nearest disposal system.
The meters should be disassembled as described below and the separate parts handed in for approved destruction.
The batteries must not be exposed to mechanical impact and the lead-in wires must not be short-circuited during
transport.
2 x A Lithium cells Lithium and thionyl chloride, approx. 2 x 0,9 g lithium Approved deposit of lithium cells
D-cell Lithium battery Lithium and thionyl chloride, >UN 3090<: approx. 4,5 g
lithium
Approved deposit of lithium cells
PCBs in MULTICAL
403
(LC-display to be removed)
Coppered epoxy laminate, components soldered on PCB scrap for metal recovery
LC-display Glass and liquid crystals Approved processing of LC-displays
Cables for flow sensor and
temperature sensors
Copper with silicone mantle Cable recovery
Top cover PC + 10% GF Plastic recycling or combustion
PCB case and connecting base PC + 10% GF with TPE gaskets Plastic recycling or combustion
Wall bracket PC + 20% glass Plastic recycling or combustion
Meter case
Clamp plate
Transducer/reflector
> 84% brass or stainless steel Material No. 1,408
<15% common steel (St 37)
<1% stainless steel
Metal recovery
Packing Environmental cardboard Cardboard recycling (Resy)
Packing Polystyrene EPS recovery
Please send any questions you may have regarding environmental matters to:
Att.: Quality and Sustainability
Fax: +45 89 93 10 01
info@kamstrup.com
As from August 2005 Kamstrup's heat meters are marked according to
EU Directive 2012/19/EU and the standard EN 50419.
The purpose of the marking is to inform our customers that the heat
meter cannot be disposed of as ordinary waste.
To Next Page
Loading...
Need help?
General
